News Center

News

Insights

Careers

Support

Exhibitions

Insights

Introduction to the Functions and Features of the Rotating Probe

Rotary probes are suitable for products that require quick contact with both ends of a cotter pin. Since both ends can connect to components such as PCBs, there is no need to solder one end, making the connection more flexible. They are ideal for housing connectors in applications like watch cases and mobile phone speakers, where soldering is not required. During assembly, however, two separate springs must be installed into the tubing, increasing the complexity of the manufacturing process. In mass production, this additional spring‑installation step can reduce overall yield. Rotary probes are instruments that utilize X‑ray technology to study and analyze the composition of microscopic regions. They can be used to determine the chemical composition of thin mineral samples. In addition to lighter elements such as H, He, Li, and Be, as well as elements heavier than uranium, they enable both qualitative and quantitative analysis. By employing highly focused, extremely narrow probe beams, these devices can measure the intensity of X‑rays emitted from very small areas of the sample. Rotary probes can operate at very small scales (on the order of microns), performing point or line scans to obtain layer‑distribution data, or generating surface‑distribution images. They also support automated batch testing, accommodating up to 9,999 pre‑set test points, thanks to…

09

2023

/

02

Common Questions and Answers About Test Probes

Common Questions and Answers About Test Probes

13

2021

/

05

What are the advantages of a double-ended probe?

Double-ended probes are ideal for products that require quick, separate contact at both ends of the spring pin. Since both ends can mate with the PCB and the mating component, there’s no need to solder one end, offering flexible connection and making them well-suited for housing‑type connectors that don’t require soldering—such as watch housings or the audio enclosures of mobile phones. During assembly, different springs must be installed into the housing in two separate steps, which increases the number of assembly operations. In high‑volume production, even a single additional spring‑installation step can reduce overall throughput. So, what are the advantages of double‑ended probes? Let’s take a look!

20

2021

/

05

Test Probe: How Much Do You Know About Test Probes?

Test probes, also known in the industry as “probes,” are used for PCB testing and are categorized into spring probes (specialized probes) and universal probes. Spring probes require the fabrication of a custom test fixture tailored to the wiring layout of the specific PCB being tested; typically, a single fixture can only accommodate one type of PCB. In contrast, universal probes only need to provide sufficient contact points, which is why many manufacturers now prefer them. Depending on their application, spring probes are further divided into PCB probes, ICT probes, and BGA probes: PCB probes are primarily used for PCB testing; ICT probes are mainly employed for in-circuit testing after component insertion; and BGA probes are specifically designed for BGA‑related applications.

09

2021

/

07

What are the advantages of a rotary probe with a dual‑head design?

The rotary probe with a double-ended tip is a precision electronic hardware component, primarily composed of three parts: a spring, a probe tube, and a needle tip. It is also known as a “spring pin.” As the name suggests, a spring pin is indeed related to springs, but it is not literally made of spring material—this is a common misconception. Instead, it incorporates an internal spring mechanism, which is quite distinct from a conventional spring. This is a highly precise electronic component with powerful functionality.

11

2021

/

08

Huarong Probe Analysis: Why Do Probes Require an Electroplated Coating?

A probe is a short single-stranded DNA or RNA fragment—typically 20 to 500 base pairs in length—used to detect its complementary nucleic acid sequence. Double-stranded DNA is heated to denature it into single strands, after which the strands are labeled with a radioactive isotope (commonly phosphorus‑32), a fluorescent dye, or an enzyme such as horseradish peroxidase, thereby generating the probe.

23

2021

/

08

< 1...151617...20 >

Sorry, there is currently no content in this section.

You can view other sections.

Sorry, there is currently no content in the current column

You can check other sections

Business license

Business License

QQ
Ms. Sun from Shenzhen

Ms. Sun from Shenzhen

2355333016

Miss Wan from Shenzhen

Miss Wan from Shenzhen

2355333001

Ms. Xu from Shenzhen

Ms. Xu from Shenzhen

2355333020

Ms. Zhang from Shenzhen

Ms. Zhang from Shenzhen

2355333015

Miss Guan from Shanghai

Miss Guan from Shanghai

2355333028

Misses in Shanghai

Misses in Shanghai

2355333029

Miss Wu from Suzhou

Miss Wu from Suzhou

2355333026

Miss Wang from Suzhou

Miss Wang from Suzhou

2355333024

Telephone
Service Hotline

Service Hotline

0755-83039995

WeChat
Shanghai

Shanghai

Shenzhen

Shenzhen

Suzhou

Suzhou

Copyright © 2026 Shenzhen Huarongfa Electronic Test Co., Ltd. Technical Support: www.300.cn Shenzhen SEO

Business license